|
Bill,
Jeez... don't take the thing
apart just to make a template for me! I think I am definitely getting
somewhere with the replies. A lot of people have bits and pieces of the
info I need. I just need to get a little bit more and put it all
together. Thanks for the effort!
Kevn
----- Original Message -----
Sent: Tuesday, March 28, 2006 5:22
PM
Subject: Re: [Chevelle-list] 69 Dash
pics?
John, I haven't seen a non-air dash with the dash out of it,
but on my A/C car, the left (driver's) side A/C bezel attaches only to the
plastic part of the dash. The plastic is cut out to fit the A/C duct and
bezel, and there isn't any metal behind it. I would think that would
also be true for a non-A/C car because there isn't any reason for any metal to
be back there. Now the right side is a different story, and the dash
metal would have to be cut. However, if you had a good template and an
air saw, it could easily be cut out. I'd like to help Kevin out with a
template, but I don't want to disassemble my dash again right now.
BillL
At 06:07 PM 3/28/2006, you wrote:
Yeah but that was a
whole separate dash carrier & metal dash that were set up for that. It
was not the result of somebody trying to cut holes in their existing dash.
Might be tough, especially on the metal carriage that is behind the plastic
part of the dash carrier. Not for the faint of heart, although you seem to
be not worried about having the skills to do the job.
|
