|
I'm looking at the OPG catalogue and it lists both
the small and big block shroud at 29" wide, which is the width of the core of my
radiator. Are you sure about this?
Kevin Riel
----- Original Message -----
Sent: Wednesday, May 03, 2006 8:09
AM
Subject: Re: [Chevelle-list] 68 fan
shroud
The regular SBC shroud will
not work. It is not wide enough (left to fight). The width is the same
as a BBC but the BBC shroud is not deep enough (front to back).
Scott
--- On Wed 05/03, Kevin Riel < [EMAIL PROTECTED] >
wrote:
From:
Kevin Riel [mailto: [EMAIL PROTECTED]]
To:
[EMAIL PROTECTED], [email protected]
Date:
Wed, 3 May 2006 05:00:05 -0700
Subject: Re:
[Chevelle-list] 68 fan shroud
Ok... all of this makes sense. Does anyone
know what the difference is for the 68 w/AC and the heavy duty
radiator? Do you think the regular 68 small block shroud would work?
Thanks for the help so far!
Kevin Riel
----- Original Message -----
From:
Scott
To: [email protected]
Sent: Monday, May 01, 2006 8:31
PM
Subject: Re: [Chevelle-list] 68
fan shroud
FYI There is not a
reproduction nor is it available from GM for 68 w/AC or heavy
duty radiator option
--- On Mon 05/01,
< [EMAIL PROTECTED]
> wrote:
From:
[mailto: [EMAIL PROTECTED]]
To:
[email protected]
Date:
Mon, 1 May 2006 22:26:33 EDT
Subject: Re:
[Chevelle-list] 68 fan shroud
Just FYI,
the 68 fan shroud is a year specific item. It has 3 bolt
holes to hold it to the radiator top plate instead of 2 like
the 69-72's. As long as you have the same top plate, get the
shroud for the engine in the car, not what radiator is in
it. Big blocks are 2 inches longer than a small block which
brings the fan closer to the radiator. If you put a big
block shroud on a small block car, the fan will not sit in
the shroud where it needs to be making it
ineffective.
Tom
|
|
|
- Re: [Chevelle-list] 68 fan shroud Kevin Riel
-
