Powder coat the frame,any colour your little heart desires.If you are going
to return the car to original,black is the best.Powder coating is really
neat,it is really tough and looks great.
----- Original Message -----
From: "Karl Groves" <[EMAIL PROTECTED]>
To: "'The Chevelle Mailing List'" <[email protected]>
Sent: Thursday, September 07, 2006 8:34 PM
Subject: [Chevelle-list] Best primer - frame/ suspension parts
With the rotisserie almost done, I'm within a week or two of taking my
body
off the frame.
I plan on sanding/ sandblasting it down as well as removing, sanding/
sandblasting all the suspension stuff as well.
My question is, what sort of primer should I use on these parts? Because
of
where I am doing this (outside, not in an enclosed area), I'd prefer to
use
a rattle can, but if that's not going to yield good results, I'll do what
I
have to do (and I have a compressor and an HVLP gun).
Anyone have any advice on this?
Karl Groves
Master Certified CIW
http://www.karlcore.com
Will Work For Parts:
http://chevelle.karlcore.com/detail.php?id=3
