Pelle If you are not using stock seats, you may need a spacer
under one or more of the mount bolts to prevent the wobble. I had to
drill new holes for one of the bolts on each of my seats. Also if you do
drill a new hole, use some kind of floor reinforcement. A large heavy duty
washer or piece of steel. You don't want the seat pulling loose in an
emergency.
On 2/12/07, Pelle Andersson <[EMAIL PROTECTED]> wrote:
Hi!
When I installed the bucket seats that have a much more rigid frame I
noticed
that the floor/brackets doesn't align horizontally with the four "legs" on
the seats
making them wiggle on three legs. If I just bolt 'em down anyway the
slides get
warped, making it hard to adjust the seat forward/backward.
Is it supposed to be some sort of adjusting mechanism to fix this?
B.R.
--------------------------
Pelle
--
Rick Schaefer
72 TPI El Camino
