Im using stock bucket seats & all the 3 bolts & the 4:th (hole!) are perfectly aligned so Im thinking of using a piece of threaded
rod in the 4:th hole & bolts to adjust the height!? Ive done some further investigation & the aftermarket (factyory specs) floor brackets have a part Included that Im missing & that seems to be some kind of level adjustment gismo? Pelle _____ Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Rick Schaefer Skickat: den 12 februari 2007 16:13 Till: The Chevelle Mailing List Ämne: Re: [Chevelle-list] Installing bucket seats? Pelle If you are not using stock seats, you may need a spacer under one or more of the mount bolts to prevent the wobble. I had to drill new holes for one of the bolts on each of my seats. Also if you do drill a new hole, use some kind of floor reinforcement. A large heavy duty washer or piece of steel. You don't want the seat pulling loose in an emergency. On 2/12/07, Pelle Andersson <[EMAIL PROTECTED]> wrote: Hi! When I installed the bucket seats that have a much more rigid frame I noticed that the floor/brackets doesn't align horizontally with the four "legs" on the seats making them wiggle on three legs. If I just bolt 'em down anyway the slides get warped, making it hard to adjust the seat forward/backward. Is it supposed to be some sort of adjusting mechanism to fix this? B.R. -------------------------- Pelle -- Rick Schaefer 72 TPI El Camino
