> From: "John " <[EMAIL PROTECTED]>
> Date: 2007/05/21 Mon AM 12:25:30 EDT
> To: "The Chevelle Mailing List" <[email protected]>
> Subject: Re: [Chevelle-list] 64 Chevelle Centerlink trivia
>
> Pete, I have the same problem. If you find out which is which I sure would
> like to know. Try to measure the diameter and I can get about as many
> readings as places I measure! My pitman arm is larger hole and center lind
> has smaller stud. Had to put washer on it to get it to fasten safely until
> I can find out what I really need. Good luck and please post what you find.
John,
I don't think it's a good idea to run mismatched parts on the steering
gear.
If the hole in the pitman arm is larger than the stud in the centerlink it's
probably just sliding around the stud rather than turning the stud in it's
bearing/bushing.
You should be able to go to the parts store and get the second series
centerlink and matching idler arm.
Or
You could get a pitman arm with smaller hole.
I'd be sure to inspect what you have now for wear before buying anything.
Pete Geurds
Douglassville, PA
