Jim, Know any welders. I am sure they have a length of TIG wire, steel or stainless, that will work. Dan
> From: [EMAIL PROTECTED]> To: [email protected]> Date: Tue, 18 Sep > 2007 12:38:22 -0400> Subject: Re: [Chevelle-list] E Brake> > I was just > thinking of making one. Will see if I can find some round stock> that is that > small.> > jim > > -----Original Message-----> From: [EMAIL PROTECTED]> > [mailto:[EMAIL PROTECTED] On Behalf Of John Nasta> Sent: Tuesday, September > 18, 2007 12:35 PM> To: [email protected]> Subject: Re: > [Chevelle-list] E Brake> > You may be able to buy (or make) a longer hook for > the passenger side. > inlinetube.com sells them in a couple/few lengths.> > > > Quoting Jim Buckingham <[EMAIL PROTECTED]>:> > > I have replaced the > intermediate cable on the ebrake. It seems that > > the cable is about 2 > inches too short. There is no way that it will > > reach the clips (one on > xmamber and one on each side). I can pull > > some slack out of the cable at > each rear brake but still not enough. > > I think (don't have it right here ) > that the length of the cable is > > 90.5 inches. Looks like I need at least > 93 inches. Anyone ever run into> this???> >> > Thanks,> >> > Jim> >> > > >
