I just picked up a 1/8 inch ss rod (free from my local welder). I will bend it up tonight should work just fine.
Jim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Nasta Sent: Tuesday, September 18, 2007 2:03 PM To: [email protected] Subject: Re: [Chevelle-list] E Brake I'm not a metallurgist, but it seems to me like if you heated it up and used a bending jig, it would bend ok. Inline tube sells them in stainless or "OEM", which I guess are steel but not stainless. They must be bending them somehow. The OEM ones are $5 for small or $7 for large. The SS ones are $5 for small and $15 for large. I need one for my El Camino too but unfortunately it's pretty low on the priority list right now. Quoting Dave Corgill <[EMAIL PROTECTED]>: > At 12:16 PM 9/18/2007, you wrote: > >> Thre is an idea. wonder if you can bend it though with out it breaking. >> >> jim > > I just used some 1/8" SS rod Stainless Steel = SS.
