Thanks guys.
Larry
Chuck Kranz wrote:
Disconnect the battery.
Use a piece if wire like an unbent paper clip
to press into the hole at the front of the switch.
Insert the key and turn to the Acc. position and a
little beyond that.
The lock cylinder will come out.
Unscrew the switch retaining ring. The switch can
now be removed from the dash.
Use two screw drivers or any desired method to spread
both retaining clips of the switch's electrical connector
while unplugging the connector.
Note:
There should be a mention of reconnecting the battery
in the replacement switch's installation instructions. ;)
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Larry Williams
Sent: Saturday, June 20, 2009 10:22 PM
To: Chevelle List
Subject: [Chevelle-list] Ignition Switch Removal - 65 Chevelle
How do I remove the ignition switch? Does the lock cylinder come out
first?
Larry
Chuck Kranz
'65 Malibu 327 4 speed
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.83/2191 - Release Date: 06/21/09 05:53:00
No virus found in this outgoing message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.83/2191 - Release Date: 06/21/09
05:53:00
