there is a proximity s/w to confirm that the tool changer has gone back. Please check proximity s/w for correct operation. Check all wiring from proximity s/w to the plc input. Also the PLC input status can be confirmed on TNC Display in I/O status listing.
Regards Narendra Iche [EMAIL PROTECTED]@fatcity.com on 06/17/2003 11:24:48 PM Please respond to [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] To: Multiple recipients of list CHIPDIR-L <[EMAIL PROTECTED]> cc: Dear All, I have a problem with PLC HEIDENHEIN TNC351 as BRIGEPORT CNC controller. On the VDU (Video Display Unit) screen show error message "TOOLS CHANGER NOT BACK" machine locked. FYI. All sensors in tools holder, tools arm and air presure are good (tested use diagnostic menu) may be some one has experience or advice to solve the problem. Regard, Tamtam -- Author: INET: [EMAIL PROTECTED] Fat City Network Services -- 858-538-5051 http://www.fatcity.com San Diego, California -- Mailing list and web hosting services --------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing). -- Author: INET: [EMAIL PROTECTED] Fat City Network Services -- 858-538-5051 http://www.fatcity.com San Diego, California -- Mailing list and web hosting services --------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing).
