On Mon, Jul 21, 2003 at 07:09:20AM -0800, [EMAIL PROTECTED] enlightened us thusly > Hi Declan, I have complete stanby unit of Omron C20 and eprom > programer, you can send me the eprom's file and i will try to do this. > > Regards Tamtam
Hi!
Thanks very much. File attached.
>
> >Hi all!
> >
> >I have dug out an Omron C40K-CDR plc out of a strange device. It will
> >not communicate and will not function.
> >
> >Manufacturer backup and machine knowledge are absolute zero. No
> >drawings, or description of what the machine does exist. But I do
> >have an eprom with the program from the plc which can be read. I
> >have read it in via an eprom programmer.
> >
> >I need to get this program into an Omron plc of a later date - a
> >CPM1A-40CDR. What I need to access is someone with a working C40k
> >(or larger - e.g. C60K) plc, interface and software.
> >
> >I would e-mail the eprom contents. They would have to load this in a
> >memory chip, and put it in their C40K or similar plc. Then they could
> >upload the file, and print it. Apparently Omron's software is so
> >limited this is the only way things can be done. With a fax of the
> >printout, I could program up the new one.
> >
> >There is no problem paying for this service. Any takers?
> >
> >Failing that, any suggestions? My best other option is to get a C20K
> >from Omron uk (All they have available) and hope it won't barf on a
> >C40K program which adresses legs it doesn't have :-o. That's
> >happening in parallel, btw. Meanwhile it's the usual hassle -
> >production stopped, and a company bleeding to death.
> >
> >Failing something, I'll have to lay in reverse engineering a machine
> >nobody has a clue about. This is always a major pain, and slow to
> >boot.
> >
> >
--
With best Regards,
Declan Moriarty.
c40k-cdr.hex
Description: Binary data
