Hi Declan, � Here's a payback... try... www.expresspcb.com � I am currently using ExpressPCB for Win98. I developing a 2 sided layer of a through-hole board for a tester. So far so good, I did the schematic and now I'm doing the PCB layout. I'm about 2 weeks into this project so far. � Have fun! [EMAIL PROTECTED]
Declan Moriarty <[EMAIL PROTECTED]> wrote: Hello All, I am introducing myself to the fancy new tester I have - a Diagnosys Pinpoint 1. This does a lot and I am on the learning curve. Diagnosys, however are used to dealing with multinationals, and somewhat reluctant to pass workarounds to cheapskates like me. Their attitude is like m$. You Program a board into the thing, and it will help you generate a netlist. With netlist, and board components listed, you can generate a schematic using their dongle protected schematic stuff. This is the lazy way. Is there a circuit drawing package where I can enter the components, and then import a netlist? That means entering the bits a second time. Is there a better/quicker way out short of paying for the dongle? I very much doubt if that would be practical. -- Author: Declan Moriarty INET: [EMAIL PROTECTED] Fat City Hosting, San Diego, California -- http://www.fatcity.com --------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing). -- Author: Tom HARROLD INET: [EMAIL PROTECTED] Fat City Hosting, San Diego, California -- http://www.fatcity.com --------------------------------------------------------------------- To REMOVE yourself from this mailing list, send an E-Mail message to: [EMAIL PROTECTED] (note EXACT spelling of 'ListGuru') and in the message BODY, include a line containing: UNSUB CHIPDIR-L (or the name of mailing list you want to be removed from). You may also send the HELP command for other information (like subscribing).
