On Sat, Mar 2, 2019 at 10:51 PM Glenn At Home <[email protected]> wrote: > > Hi, > I was just looking over my CSV files for my Baofeng radios, and I didn't > notice a column for power. > I thought there was a column that we could put in hi or a numeric value. > If not, how do I do this in Chirp? > Thanks. > Glenn > Hi Glenn,
CSV files are not radio specific. They only contain the settings that are not radios specific. For example the RX frequency would be the same no matter which radio Vendor/Model you loaded it into. The TX CTCSS tone would be the same no matter what radio Vendor/Model you loaded it into. The power level is not common across all radio Vendor/Model radio you loaded it into (50 watts from a mobile radio cannot load into a UV-5R) so it is not available in a CHIRP compatible CSV file. As Nigel mentioned, the native CHIRP Radio Images File (*.img) is where each radio's Vendor/Model specific settings are saved to and retrieved from. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
