Your cable is probably not seated correctly in the radio. You may need to
shave some of the plastic around the connector to get it.
Common with some cables.
Mike, WB4TTZ
On Jul 18, 2019 09:52, Brennan Stanford <[email protected]> wrote:
>
> I am having issues using CHIRP to program my brand new Baofeng UV-82HP. I
> have an FTDI cable and am using a Mac (MacOS Mojave 10.14.5) and CHIRP
> 7.13.2019. I have zero problems with downloading from and programming to my
> BF-F8HP, but the UV-82HP will not work. Every time I connect to the radio and
> attempt to do the original image download, the radio restarts itself, and
> then CHIRP then gives me “Radio did not respond” error.
>
> Brennan J. Stanford
>
> office: 419.740.0513
>
> mobile: 419.450.7290
>
> email: [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
