I have never used that cable, so I cannot comment. Does it work with the Yaesu software?
Colleagues: have any of you used that cable successfully with FT-4 or FT-65? On Thu, Aug 15, 2019 at 4:50 PM John Higby <[email protected]> wrote: > USB-57A which is listed for the FT-4X. Windows 7. I believe I'm using the > latest daily download. > > > 73 > > kj7hel > ------------------------------ > *From:* [email protected] < > [email protected]> on behalf of Dan Clemmensen < > [email protected]> > *Sent:* Thursday, August 15, 2019 4:34 PM > *To:* Discussion of CHIRP <[email protected]> > *Subject:* Re: [chirp_users] Yaesu FT-4X Download Problem > > What cable are you using? (also, what OS and what CHIRP version?) The > FT-4X and related radios use a half-duplex connection with TxD and RxD on > the same wire. The Yaesu SCU-35 cable works, of course. but if you are > using another cable you may need to modify it. I use a trivial connection > via resistors to the serial port on a Raspberry Pi. > > I need to get back into CHIRP programming, so I guess I'll fire up my > FT-4X and play some more. > > On Thu, Aug 15, 2019 at 4:11 PM John Higby <[email protected]> wrote: > > New..Yaesu FT-4X...never been programmed, won't download & doesn't offer > an Upload option. Chirp starts ...then error...failed to communicate with > radio: Incorrect ACK on serial report. > > ANY help appreciated. > > 73 > John > kj7hel > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Dan Clemmensen at [email protected] > To unsubscribe, send an email to > [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Dan Clemmensen at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
