On Thu, Feb 27, 2020 at 8:33 PM Hugh & Sylvia Greenwood <[email protected]> wrote: > > I hate to bother the group with this, but here we go. I have 2 Bao Feng > GT-3TP units, no problem using CHIRP to transfer between them using the > latest daily build and the recommended configurations from the home CHIRP > page. Editing works fine and changes transfer properly. > > > > But when I try to do exactly the same from the 3-TP to the 5-TP the cloning > fails because I cannot open the panel giving access to the UV 82 HP > configuration that is required. I can download from the radio just fine, and > upload to the radio, so the program cloning is talking to the GT-5TP. When I > go to ‘file’ and get the file I want to put in the GT-5TP, the system will > not give me access to the proper configuration for that radio because > somehow it has lost the configuration inherited from down loading and > uploading. > > > > I tried using the ‘export csv’ option, with the same result. > > > > Sorry to be simple but I’m stumped. > > > > Hugh VE7MDA >
The best way to do this does not require messing with CSV file. What you do is download from the source radio and save the tab to a CHIRP Radio Images (*.img) file. Then you download from the target radio. If you haven't already, save a copy of the target radio to a CHIRP Radio Images file as a backup. Then Import the CHIRP Radio Images file into the tab for the target radio. Make any other settings changes and upload to your radio. This page explains how to do it between ad UV-5R and a UV-82. https://baofengtech.com/CHIRPImport Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
