On Sun, Sep 6, 2020 at 1:04 PM Paul Hansen <[email protected]> wrote: > > I'm unable to program my Baofeng UV-9 plus radio as well. I've been on you > tube and searched the internet for instructions but have had no luck finding > something that works. I have a Baofeng cable as well and have downloaded the > Chirp software. I don't know how to tell if you are in the right port but it > doesn't seem like any of them are working. > > If anyone has any easy to understand instructions on how to program this > radio please send them to me. > > Thanks, > Paul >
Paul, If you are running Windows, use the Device Manager application to determine exactly which port is assigned to your programming cable. You should be able to plug in your programming cable and see the port assignment appear under "Ports (COM & LPT)". This is also where you would determine which chip is in the programming cable and the version of the driver is installed. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
