Since the Kenwood requires echolink mode to key radio w/o VOX it uses RTS pin to key. I set Radio back to non-echolink and was able to read memories. Does CHIRP enable RTS pin in serial port when it reads memories? Would seem so.
Jim WB8EYE -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Jim Unroe Sent: Monday, September 14, 2020 10:10 AM To: Discussion of CHIRP <[email protected]> Subject: Re: [chirp_users] Chirp, upon read radio memory keys radio On Mon, Sep 14, 2020 at 8:45 AM <[email protected]> wrote: > > Chirp, upon read data memory, keys radio Instead of having it go to PROG mode. > > Kenwood TM-V71 > > Windows 10 > > No other task using comport > > Fresh restart of OS > > Radio keys with RTS > > > > I must click red x to stop chirp. > > > > Thank you > > WB8EYE > > Jim > > Gaines, MI Jim, Is it a programming cable with a Prolific USB-to-Serial chip? If yes, have you downloaded, installed and selected the older, but necessary, Prolific v3.2.0.0 device driver? If you don't know, you can find out by using the Device Manager application. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James Norcross at [email protected] To unsubscribe, send an email to [email protected] _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
