Trust me. Over the past three years I've owned three Baofeng HTs including your model. The program has always worked fine. Sometimes I had to download a back-dated driver (available at miklor.com) to work with the counterfeit chip in the cable and other times I simply had to press the connector into the radio harder. Chris Knowles, N1CAK
On 3/17/2021 12:23 AM, Dean Berglund wrote: > Steven, Next time please include your message in the body of the message > rather than just the subject. Rather than delete the program which is a > good program, maybe look into the possibility the driver isn't correct > for the cable you are using. You should also look at the cable where it > enters the radio. Sometimes you have to push it in hard to get it seated > completely or, I had to do this, I had to trim the sides of the cable > where it enters the radio because the plastic was hitting and didn't > allow the plug to insert all the way. Check out miklor.com for more info. > Dean KC9REN > > On 3/16/2021 11:00 PM, Steven Feddersen wrote: >> Sent from my iPhone >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Dean Berglund at [email protected] >> To unsubscribe, send an email to >> [email protected] > -- Christopher Allan Knowles, MPA P.O. Box 4632 Vineyard Haven, MA 02568 Please find my LinkedIn profile at: https://www.linkedin.com/in/chris-knowles-99aba51a/ Staff Sergeant, United States Air Force, 1970 - 1974 Call Sign: N1CAK - Amateur Extra Class Accredited Volunteer Examiner (VE) _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
