I have used CHIRP numerous times for the UV 5R. I agree with the Dean most issues I ran into were from the connector not seating correctly. Also updating or reinstalling the driver solved the issue
On Wed, Mar 17, 2021 at 12:24 AM Dean Berglund <[email protected]> wrote: > Steven, Next time please include your message in the body of the message > rather than just the subject. Rather than delete the program which is a > good program, maybe look into the possibility the driver isn't correct > for the cable you are using. You should also look at the cable where it > enters the radio. Sometimes you have to push it in hard to get it seated > completely or, I had to do this, I had to trim the sides of the cable > where it enters the radio because the plastic was hitting and didn't > allow the plug to insert all the way. Check out miklor.com for more info. > Dean KC9REN > > On 3/16/2021 11:00 PM, Steven Feddersen wrote: > > > > Sent from my iPhone > > _______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Dean Berglund at [email protected] > > To unsubscribe, send an email to > [email protected] > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ron at [email protected] > To unsubscribe, send an email to > [email protected] >
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
