Or program them into a legal radio. > On 16/03/2022 12:51 Andreas Führmann via chirp_users > <[email protected]> wrote: > > > Hm…so I will have to program these channels manually. > > > Am 16.03.2022 um 13:25 schrieb Jim Unroe <[email protected]>: > > > > On Wed, Mar 16, 2022 at 7:05 AM Andreas Führmann via chirp_users > > <[email protected]> wrote: > >> > >> Hi there, > >> > >> just aquired an RA 685 and programmed it with Chirp. For emergency reasons > >> I have also added frequencies outside of the ham band. Now the mistery > >> begins. The radio came open with transmit from 136 to 178 MHz and from 400 > >> to 480 MHz, which is working without any problem but only in VFO mode. > >> When I go to channel mode f.I. on 446 MHz (European PMR), it will not > >> transmit. Maybe I‘ve overseen a check box or is there any trick to > >> overcome this issue? Thanks in advance. > >> > >> 73 de DC3AFA, Andy > > > > Hi Andy, > > > > It is not a mystery. CHIRP has been programmed to behave the same way > > the factory programming software works (TX/RX 144-148 MHz and 430-440 > > MHz). Unlike the factory software, CHIRP allows you to also add RX > > only frequencies in the 136-174 MHz and 400-480 MHz range. > > > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected]
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
