Yeah, I just had someone read it, and it is a BF F9V+ I believe they said. ----- Original Message ----- From: "Nigel A. Gunn G8IFF/W8IFF" <[email protected]> To: "Discussion of CHIRP" <[email protected]>; "K0LNY_Glenn" <[email protected]> Sent: Tuesday, July 19, 2022 6:18 PM Subject: Re: [chirp_users] Baofeng HP9+ won't read
There doesn't appear to be a Baofeng HP9+ > On 19/07/2022 18:22 EDT K0LNY_Glenn <[email protected]> wrote: > > > Hi, > I have a Baofeng HP 9+, and I'm using Chirp on an older Ubuntu live on a > thumb drive, that I've booted to before and used to program the same > radios. > I was just able to first read and write to my UV 5R with the same cable > that > I'm trying to use on the 9+. > I worked and worked on the connection, making sure it was tight into the > radio. > I reset the radio with menu 40 and #1, which is a full reset, it went to > Chinese, and then I set it to English again, but it still won't read from > the radio. > Does anyone have any ideas why it won't read? > I'm pretty sure the 9+ uses the same cable as the UV5R. > Thanks for any suggestions. > > Glenn > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail [email protected] www http://www.ngunn.net _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected]
