I’ve scanned several monthly archives for "FT-65" and separately for “upload”.
The only reports I can find is that users are trying to upload a CSV tab (a
common problem) and not the tab downloaded from the radio. I’ve added my
channels to the FT-65 download tab and still no joy uploading. Im using a Mac
OS Ventura 13.5 and an RTsystems (ZRT-USB-55) with current drivers (verified
with tech support) working in the Mac. Chirp downloads from the radio without
any issue. I see both TX and RX displayed on the radio and CLONE OK but no
changes are made to the memory locations. I’ve reset the radio to factory
defaults and made only a single change to a memory channel in Chirp to limit
any input error without success. Probably something simple but I just don’t
see it. Any thoughts?
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]
To report this email as off-topic, please email
[email protected]
Searchable archive:
https://www.mail-archive.com/[email protected]
