On Sat, Jul 29, 2023 at 1:11 PM Peter.jay12 via chirp_users <[email protected]> wrote: > > I’ve scanned several monthly archives for "FT-65" and separately for > “upload”. The only reports I can find is that users are trying to upload a > CSV tab (a common problem) and not the tab downloaded from the radio. I’ve > added my channels to the FT-65 download tab and still no joy uploading. Im > using a Mac OS Ventura 13.5 and an RTsystems (ZRT-USB-55) with current > drivers (verified with tech support) working in the Mac. Chirp downloads > from the radio without any issue. I see both TX and RX displayed on the > radio and CLONE OK but no changes are made to the memory locations. I’ve > reset the radio to factory defaults and made only a single change to a memory > channel in Chirp to limit any input error without success. Probably > something simple but I just don’t see it. Any thoughts?
You don't/can't upload a CSV tab directly into a radio. You have to download from the radio to create a tab that is compatible with the radio and then load the CSV file to create a second tab. Copy-and-paste the memory rows from the CSV tab to the FT-65 tab. Finally upload the FT-65 tab back into the radio. Jim KC9HI _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
