Andy, that img.bak file will not open on my tablet. I get a message that .bak files are not recognized.
Dick > > On Aug 7, 2023 at 2:12 PM, Andy Zaayenga via chirp_users > <[email protected]> wrote: > > > > > Thanks Peter. None of the locations are marked Skip. For reference, I’ve > attached the img file, renamed to a bak extension so the servers don’t block > it. > > > > > > > > The Skip field only accepts S (Skip) or blank, there is no dropdown for > Priority. The manual references that there is only one Priority channel, kept > in memory location 0. No memory location 0 shows in the CHIRP file. > > > > > > > > > 73 > > > > > Andy > > > > > > > > From: [email protected] <[email protected]> > Sent: Monday, August 7, 2023 12:58 PM > To: Andy Zaayenga <[email protected]>; [email protected] > Subject: Re: [chirp_users] FTM-3100R > > > > > > > > > Check to see if you have something entered in the Skip column of Chirp. > > > https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns > > > > > > > > > > > > > > > > > > Skip > > > > > The scan skip mode for the channel. The values and their meanings are: > > > > S: Skip this channel during scan > > P: This channel is a priority > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users > > <[email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > Hi folks, > > > > I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers > > to > > run with CHIRP. I downloaded the radio using the FTM-3200D R template as > > per the CHIRP home page. Downloading and uploading works fine. > > > > I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I > > monitor > > that are covered by the FTM-3100R. Uploading those to the radio works fine > > and downloading shows them all in memory. > > > > However, I notice that when I scan all 63 frequencies the radio only scans > > the first 14. The display just stops on the 14th location while the numbers > > under MR keep counting up to 63. Then it cycles back to location 1. I > > have > > the radios side by side and the FT-60R scans all the locations while the > > FTM-3100R only the first 14. > > > > The specs say the radio has 199 memory locations which is consistent with > > the CHIRP img > > * 199 "basic" memory channels, numbered "1" through "199". > > > > But the CHIRP image doesn't show the home channel or any of the L or U > > locations. > > * A "Home" channel, providing storage and quick recall of one prime > > frequency. > > * 10 sets of band-edge memories, also known as "Programmable Memory Scan" > > channels, labeled "L0/U0" through "L9/U9". > > > > Does anyone out there have an FTM-3100R and can let me know if I'm doing > > something wrong? I'm wondering if there's some issue with the FTM-3200D R > > template WRT the FTM-3100R. > > > > Thanks from a first-time poster! > > > > 73 > > Andy Zaayenga > > KD2SME > > Yaesu FT-60R, Yaesu FTM-3100R > > > > > > <Yaesu_FTM-3100R_2023-08-06.csv>_______________________________________________ > > chirp_users mailing list > > [email protected] > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Pete at [email protected] > > To unsubscribe, send an email to > > [email protected] > > To report this email as off-topic, please email > > [email protected] > > Searchable archive: > > https://www.mail-archive.com/[email protected] > > > > > > > > > > > > > > > > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Dick Smith at [email protected] > To unsubscribe, send an email to > [email protected] > To report this email as off-topic, please email > [email protected] > Searchable archive: > https://www.mail-archive.com/[email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
