" I’ve attached the img file, renamed to a bak extension" Rename [ https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=133513&part=2 | Yaesu_FTM-3100R.img.bak ] to [ https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=133513&part=2 | Yaesu_FTM-3100R.img ]
Get it? From: "w4rss" <[email protected]> To: "peter.fontneau" <[email protected]>, "chirp users" <[email protected]>, "Andy Zaayenga" <[email protected]> Sent: Monday, August 7, 2023 4:18:25 PM Subject: Re: [chirp_users] FTM-3100R Andy, that img.bak file will not open on my tablet. I get a message that .bak files are not recognized. Dick On Aug 7, 2023 at 2:12 PM, Andy Zaayenga via chirp_users < [ mailto:[email protected] | [email protected] ] > wrote: Thanks Peter. None of the locations are marked Skip. For reference, I’ve attached the img file, renamed to a bak extension so the servers don’t block it. The Skip field only accepts S (Skip) or blank, there is no dropdown for Priority. The manual references that there is only one Priority channel, kept in memory location 0. No memory location 0 shows in the CHIRP file. 73 Andy From: [email protected] <[email protected]> Sent: Monday, August 7, 2023 12:58 PM To: Andy Zaayenga <[email protected]>; [email protected] Subject: Re: [chirp_users] FTM-3100R Check to see if you have something entered in the Skip column of Chirp. [ https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns | https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns ] Skip The scan skip mode for the channel. The values and their meanings are: * S : Skip this channel during scan * P : This channel is a priority BQ_BEGIN On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users < [ mailto:[email protected] | [email protected] ] > wrote: Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R <Yaesu_FTM-3100R_2023-08-06.csv>_______________________________________________ chirp_users mailing list [ mailto:[email protected] | [email protected] ] [ http://intrepid.danplanet.com/mailman/listinfo/chirp_users | http://intrepid.danplanet.com/mailman/listinfo/chirp_users ] This message was sent to Pete at [ mailto:[email protected] | [email protected] ] To unsubscribe, send an email to [ mailto:[email protected] | [email protected] ] To report this email as off-topic, please email [ mailto:[email protected] | [email protected] ] Searchable archive: [ https://www.mail-archive.com/[email protected] | https://www.mail-archive.com/[email protected] ] _______________________________________________ chirp_users mailing list chirp_users@ [ https://z8.zimbrahostedemail.com/intrepid.danplanet.com | intrepid.danplanet.com ] [ http://intrepid.danplanet.com/mailman/listinfo/chirp_users | http://intrepid.danplanet.com/mailman/listinfo/chirp_users ] This message was sent to Dick Smith at [email protected] To unsubscribe, send an email to chirp_users-unsubscribe@ [ https://z8.zimbrahostedemail.com/intrepid.danplanet.com | intrepid.danplanet.com ] To report this email as off-topic, please email chirp_users-owner@ [ https://z8.zimbrahostedemail.com/intrepid.danplanet.com | intrepid.danplanet.com ] Searchable archive: [ https://www.mail-archive.com/chirp_users | https://www.mail-archive.com/chirp_users ] @ [ https://z8.zimbrahostedemail.com/intrepid.danplanet.com | intrepid.danplanet.com ] BQ_END _______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Danny at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected] To report this email as off-topic, please email [email protected] Searchable archive: https://www.mail-archive.com/[email protected]
