I have one of my ntp servers (It works fine serving a number of other
machines) being called from my home computer. Lets call the server S and the
home machine H. I have S in my chrony.conf file as a server.
I run
tcpdump -i xxxx port ntp
On both H and S.
If I do
telnet S 123
I see the message going out from H, arrive at S and then another packet leaves
S and arrives back at H. So, port 123 is not being blocked by any of the
firewalls between the two.
But, if I run chronyc on H and do a
burst 3/5 S
I see the packets going out from H, but see nothing arrive at S, or leave from
S back to H.
Does anyone have any hints as to where the packet could be being lost?
when the telnet packet gets through fine.
Note that I use other servers (eg a pool server) from my chrony on H, and they work fine
so again it does not seem to be a problem with the firewalls/routers between H
and the internet.
William G. Unruh __| Canadian Institute for|____ Tel: +1(604)822-3273
Physics&Astronomy _|___ Advanced Research _|____ Fax: +1(604)822-5324
UBC, Vancouver,BC _|_ Program in Cosmology |____ un...@physics.ubc.ca
Canada V6T 1Z1 ____|____ and Gravity ______|_ www.theory.physics.ubc.ca/
--
To unsubscribe email chrony-users-requ...@chrony.tuxfamily.org
with "unsubscribe" in the subject.
For help email chrony-users-requ...@chrony.tuxfamily.org
with "help" in the subject.
Trouble? Email listmas...@chrony.tuxfamily.org.
The C and M port used by chronyc is UDP/323. Perhaps a firewall setting to open that would help.
On 4 Mar 2022 5:58 pm, Bill Unruh <un...@physics.ubc.ca> wrote:
- [chrony-users] chrony messages not getting to server. Bill Unruh
- Re: [chrony-users] chrony messages not getting to ... Bryan Christianson
- Re: [chrony-users] chrony messages not getting... Bill Unruh
- Re: [chrony-users] chrony messages not get... Miroslav Lichvar
- Re: [chrony-users] chrony messages not... Bill Unruh
- Re: [chrony-users] chrony message... Miroslav Lichvar
- Re: [chrony-users] chrony messages not getting to ... bradh