This should still be working as documented in the manual: Profile for bluray only, use the default bluray.m2ts or choose bluray_lpcm.m2ts for linear pulse code modulation for digitally encoding uncompressed audio information.
On Tue, Jan 16, 2024 at 8:52 AM Andrew Randrianasulu via Cin < [email protected]> wrote: > Start cinelerra-gg from terminal so you can see terminal output > > Open your source in cinelerra-gg as usual, choice format settings, go > to DVD creation window. > > Select all values as you need, click ok, wait for batchrender window to > appear > > In it, select second line and change codec to RAW PCM, and set it to > 16 bit, signed, byteorder Lo-Hi (big endian) > > click "start". Cingg will finish but job is not! > > from terminal, note location of dvd.sh file and open it in editor > > running /dev/shm//dvd_20240116-182336/dvd.sh > INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $) > **ERROR: [mplex] Unable to open file > /dev/shm/dvd_20240116-182336/dvd.ac3 for reading. > > so > > mcedit /dev/shm//dvd_20240116-182336/dvd.sh > > and set mplex parameter " -L 48000:2:16" so full string will look like > > mplex -f 8 -L 48000:2:16 -o $dir/dvd.mpg $dir/dvd.m2v $dir/dvd.lpcm > > note, lpcm extension is important! > > now mv pcm file into same but with new extension (in theory you can > change audio file extension into lpcm at batchrender window, not > tested) > > mv /dev/shm//dvd_20240116-182336/dvd.pcm > /dev/shm//dvd_20240116-182336/dvd.lpcm > > run script: > > bash-5.1$ /dev/shm//dvd_20240116-182336/dvd.sh > running /dev/shm//dvd_20240116-182336/dvd.sh > INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $) > INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.m2v looks like > an MPEG Video stream. > INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.lpcm looks like > an LPCM Audio stream. > INFO: [mplex] Video stream 0: profile 8 selected - ignoring > non-standard options! > INFO: [mplex] Found 1 audio streams, 1 video streams and 0 subtitle > streams > INFO: [mplex] Selecting dvdauthor DVD output profile > INFO: [mplex] Multiplexing video program stream! > INFO: [mplex] Scanning for header info: Video stream e0 > (/dev/shm/dvd_20240116-182336/dvd.m2v) > INFO: [mplex] VIDEO STREAM: e0 > INFO: [mplex] Frame width : 720 > INFO: [mplex] Frame height : 576 > INFO: [mplex] Aspect ratio : 16:9 display > INFO: [mplex] Picture rate : 25.000 frames/sec > INFO: [mplex] Bit rate : 9000000 bits/sec > INFO: [mplex] Vbv buffer size : 229376 bytes > INFO: [mplex] CSPF : 0 > INFO: [mplex] Scanning for header info: LPCM Audio stream 00 > (/dev/shm/dvd_20240116-182336/dvd.lpcm) > INFO: [mplex] LPCM AUDIO STREAM: > INFO: [mplex] Bit rate : 192000 bytes/sec (1536000) bit/sec) > INFO: [mplex] Channels : 2 > INFO: [mplex] Bits per sample: 16 > INFO: [mplex] Frequency : 48000 Hz > INFO: [mplex] SYSTEMS/PROGRAM stream: > INFO: [mplex] rough-guess multiplexed stream data rate : 10753200 > INFO: [mplex] target data-rate specified : 10080000 > ++ WARN: [mplex] Target data rate lower than computed requirement! > ++ WARN: [mplex] N.b. a 20% or so discrepancy in variable bit-rate > ++ WARN: [mplex] streams is common and harmless provided no time-outs will > occur > INFO: [mplex] Run-in delay = 10800 Video delay = 10800 Audio delay = > 14400 > INFO: [mplex] New sequence commences... > INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000 > INFO: [mplex] Audio bd: buf= 0 frame=000000 sector=00000000 > INFO: [mplex] STREAM e0 completed > INFO: [mplex] STREAM bd completed > INFO: [mplex] Multiplex completion at SCR=265362. > INFO: [mplex] Video e0: completed > INFO: [mplex] Audio bd: completed > INFO: [mplex] VIDEO_STATISTICS: e0 > INFO: [mplex] Video Stream length: 3101158 bytes > INFO: [mplex] Sequence headers: 5 > INFO: [mplex] Sequence ends : 0 > INFO: [mplex] No. Pictures : 75 > INFO: [mplex] No. Groups : 5 > INFO: [mplex] No. I Frames : 5 avg. size 51909 bytes > INFO: [mplex] No. P Frames : 71 avg. size 39569 bytes > INFO: [mplex] No. B Frames : 0 avg. size 0 bytes > INFO: [mplex] Average bit-rate : 8160800 bits/sec > INFO: [mplex] Peak bit-rate : 8992000 bits/sec > INFO: [mplex] BUFFERING min 22252 Buf max 219233 > INFO: [mplex] AUDIO_STATISTICS: bd > INFO: [mplex] Audio stream length 583680 bytes. > INFO: [mplex] Frames : 1823 > INFO: [mplex] BUFFERING min 12112 Buf max 52344 > INFO: [mplex] MUX STATUS: no under-runs detected. > DVDAuthor::dvdauthor, version 0.7.2. > Build options: gnugetopt imagemagick iconv freetype fribidi fontconfig > Send bug reports to <[email protected]> > > INFO: default video format is PAL > INFO: dvdauthor creating VTS > STAT: Picking VTS 01 > > STAT: Processing /dev/shm/dvd_20240116-182336/dvd.mpg... > > INFO: Video pts = 0.160 .. 3.160 > INFO: Audio[16] pts = 0.160 .. 3.200 > STAT: VOBU 5 at 3MB, 1 PGCs > CHAPTERS: VTS[1/1] 0.000 > INFO: Generating VTS with the following video attributes: > INFO: MPEG version: mpeg2 > INFO: TV standard: pal > INFO: Aspect ratio: 16:9 > INFO: Resolution: 720x576 > INFO: Audio ch 0 format: ac3/6ch, 48khz drc, 'en' > WARN: Audio ch 0 is not used! > INFO: Audio ch 1 format: pcm/2ch, 48khz 16bps > > STAT: fixed 5 VOBUs > INFO: dvdauthor creating table of contents > INFO: Scanning /dev/shm/dvd_20240116-182336/iso/VIDEO_TS/VTS_01_0.IFO > To burn dvd, load blank media and run: > growisofs -dvd-compat -Z /dev/dvd -dvd-video > /dev/shm/dvd_20240116-182336/iso > Завершено > > ==== > > you probably need to tweak dvdauthor file to so our audio will be > audio channel 0. > > I'm thinking about making "use PCM" checkbox in (already a bit > crowded) DVD creation window ..lets see now it will progress ... > > example files attached ... > -- > Cin mailing list > [email protected] > https://lists.cinelerra-gg.org/mailman/listinfo/cin >
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
