вт, 16 янв. 2024 г., 19:21 Phyllis Smith <[email protected]>:
> This should still be working as documented in the manual: > > Profile for bluray only, > use the default bluray.m2ts or choose bluray_lpcm.m2ts for linear pulse > code modulation for digitally encoding uncompressed audio information. > Note, this procedure for DVD (smaller 4.7Gb disks) not their bigger and bluer brothers :) > On Tue, Jan 16, 2024 at 8:52 AM Andrew Randrianasulu via Cin < > [email protected]> wrote: > >> Start cinelerra-gg from terminal so you can see terminal output >> >> Open your source in cinelerra-gg as usual, choice format settings, go >> to DVD creation window. >> >> Select all values as you need, click ok, wait for batchrender window to >> appear >> >> In it, select second line and change codec to RAW PCM, and set it to >> 16 bit, signed, byteorder Lo-Hi (big endian) >> >> click "start". Cingg will finish but job is not! >> >> from terminal, note location of dvd.sh file and open it in editor >> >> running /dev/shm//dvd_20240116-182336/dvd.sh >> INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $) >> **ERROR: [mplex] Unable to open file >> /dev/shm/dvd_20240116-182336/dvd.ac3 for reading. >> >> so >> >> mcedit /dev/shm//dvd_20240116-182336/dvd.sh >> >> and set mplex parameter " -L 48000:2:16" so full string will look like >> >> mplex -f 8 -L 48000:2:16 -o $dir/dvd.mpg $dir/dvd.m2v $dir/dvd.lpcm >> >> note, lpcm extension is important! >> >> now mv pcm file into same but with new extension (in theory you can >> change audio file extension into lpcm at batchrender window, not >> tested) >> >> mv /dev/shm//dvd_20240116-182336/dvd.pcm >> /dev/shm//dvd_20240116-182336/dvd.lpcm >> >> run script: >> >> bash-5.1$ /dev/shm//dvd_20240116-182336/dvd.sh >> running /dev/shm//dvd_20240116-182336/dvd.sh >> INFO: [mplex] mplex version 2.1.0 (2.2.7 $Date: 2012/11/17 01:55:16 $) >> INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.m2v looks like >> an MPEG Video stream. >> INFO: [mplex] File /dev/shm/dvd_20240116-182336/dvd.lpcm looks like >> an LPCM Audio stream. >> INFO: [mplex] Video stream 0: profile 8 selected - ignoring >> non-standard options! >> INFO: [mplex] Found 1 audio streams, 1 video streams and 0 subtitle >> streams >> INFO: [mplex] Selecting dvdauthor DVD output profile >> INFO: [mplex] Multiplexing video program stream! >> INFO: [mplex] Scanning for header info: Video stream e0 >> (/dev/shm/dvd_20240116-182336/dvd.m2v) >> INFO: [mplex] VIDEO STREAM: e0 >> INFO: [mplex] Frame width : 720 >> INFO: [mplex] Frame height : 576 >> INFO: [mplex] Aspect ratio : 16:9 display >> INFO: [mplex] Picture rate : 25.000 frames/sec >> INFO: [mplex] Bit rate : 9000000 bits/sec >> INFO: [mplex] Vbv buffer size : 229376 bytes >> INFO: [mplex] CSPF : 0 >> INFO: [mplex] Scanning for header info: LPCM Audio stream 00 >> (/dev/shm/dvd_20240116-182336/dvd.lpcm) >> INFO: [mplex] LPCM AUDIO STREAM: >> INFO: [mplex] Bit rate : 192000 bytes/sec (1536000) bit/sec) >> INFO: [mplex] Channels : 2 >> INFO: [mplex] Bits per sample: 16 >> INFO: [mplex] Frequency : 48000 Hz >> INFO: [mplex] SYSTEMS/PROGRAM stream: >> INFO: [mplex] rough-guess multiplexed stream data rate : 10753200 >> INFO: [mplex] target data-rate specified : 10080000 >> ++ WARN: [mplex] Target data rate lower than computed requirement! >> ++ WARN: [mplex] N.b. a 20% or so discrepancy in variable bit-rate >> ++ WARN: [mplex] streams is common and harmless provided no time-outs >> will occur >> INFO: [mplex] Run-in delay = 10800 Video delay = 10800 Audio delay = >> 14400 >> INFO: [mplex] New sequence commences... >> INFO: [mplex] Video e0: buf= 0 frame=000000 sector=00000000 >> INFO: [mplex] Audio bd: buf= 0 frame=000000 sector=00000000 >> INFO: [mplex] STREAM e0 completed >> INFO: [mplex] STREAM bd completed >> INFO: [mplex] Multiplex completion at SCR=265362. >> INFO: [mplex] Video e0: completed >> INFO: [mplex] Audio bd: completed >> INFO: [mplex] VIDEO_STATISTICS: e0 >> INFO: [mplex] Video Stream length: 3101158 bytes >> INFO: [mplex] Sequence headers: 5 >> INFO: [mplex] Sequence ends : 0 >> INFO: [mplex] No. Pictures : 75 >> INFO: [mplex] No. Groups : 5 >> INFO: [mplex] No. I Frames : 5 avg. size 51909 bytes >> INFO: [mplex] No. P Frames : 71 avg. size 39569 bytes >> INFO: [mplex] No. B Frames : 0 avg. size 0 bytes >> INFO: [mplex] Average bit-rate : 8160800 bits/sec >> INFO: [mplex] Peak bit-rate : 8992000 bits/sec >> INFO: [mplex] BUFFERING min 22252 Buf max 219233 >> INFO: [mplex] AUDIO_STATISTICS: bd >> INFO: [mplex] Audio stream length 583680 bytes. >> INFO: [mplex] Frames : 1823 >> INFO: [mplex] BUFFERING min 12112 Buf max 52344 >> INFO: [mplex] MUX STATUS: no under-runs detected. >> DVDAuthor::dvdauthor, version 0.7.2. >> Build options: gnugetopt imagemagick iconv freetype fribidi fontconfig >> Send bug reports to <[email protected]> >> >> INFO: default video format is PAL >> INFO: dvdauthor creating VTS >> STAT: Picking VTS 01 >> >> STAT: Processing /dev/shm/dvd_20240116-182336/dvd.mpg... >> >> INFO: Video pts = 0.160 .. 3.160 >> INFO: Audio[16] pts = 0.160 .. 3.200 >> STAT: VOBU 5 at 3MB, 1 PGCs >> CHAPTERS: VTS[1/1] 0.000 >> INFO: Generating VTS with the following video attributes: >> INFO: MPEG version: mpeg2 >> INFO: TV standard: pal >> INFO: Aspect ratio: 16:9 >> INFO: Resolution: 720x576 >> INFO: Audio ch 0 format: ac3/6ch, 48khz drc, 'en' >> WARN: Audio ch 0 is not used! >> INFO: Audio ch 1 format: pcm/2ch, 48khz 16bps >> >> STAT: fixed 5 VOBUs >> INFO: dvdauthor creating table of contents >> INFO: Scanning /dev/shm/dvd_20240116-182336/iso/VIDEO_TS/VTS_01_0.IFO >> To burn dvd, load blank media and run: >> growisofs -dvd-compat -Z /dev/dvd -dvd-video >> /dev/shm/dvd_20240116-182336/iso >> Завершено >> >> ==== >> >> you probably need to tweak dvdauthor file to so our audio will be >> audio channel 0. >> >> I'm thinking about making "use PCM" checkbox in (already a bit >> crowded) DVD creation window ..lets see now it will progress ... >> >> example files attached ... >> -- >> Cin mailing list >> [email protected] >> https://lists.cinelerra-gg.org/mailman/listinfo/cin >> >
-- Cin mailing list [email protected] https://lists.cinelerra-gg.org/mailman/listinfo/cin
