In the 2960 configuration library; it says you can use IP access lists in class-map commands for police/qos etc. Do you know if this is true?
Search for "Classifying Traffic by Using ACLs " http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_ chapter09186a00805a7699.html Sean -- Sean Watkins North Rock Communications Phone: 441-540-4102 > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Liviu Pislaru > Sent: Tuesday, April 03, 2007 12:23 AM > To: [email protected] > Subject: Re: [c-nsp] 2960 for video & qos > > hello, > > 2960 works just fine for LAN QoS. you can mark, classifiy and > police, you can adjust maping, buffers and output queues > (1p3q3t). if you have voip on your network you can also use > "auto-qos"; use 3560 only if you need la L3 device. > > -- > liviu. > > ----- Original Message ----- > From: "Dan" <[EMAIL PROTECTED]> > Cc: <[email protected]> > Sent: Tuesday, April 03, 2007 1:06 AM > Subject: [c-nsp] 2960 for video & qos > > > > Hello, > > > > We are setting up a 6 site video conferencing system and we need to > > replace some of our switches and I was wondering if a 2960 > would do the > > job as far as QOS goes? Or should I go with a 3560? > > > > Dan. > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
