The 2960 and 3550 do not support NBAR functionality. http://www.cisco.com/en/US/products/ps6616/products_qanda_item09186a0080 0a3ded.shtml
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Kurt Bales > Sent: Tuesday, April 03, 2007 7:41 AM > To: [email protected] > Subject: Re: [c-nsp] 2960 for video & qos > > Can the 2960 match based on protocol (nbar?). And the next question how well > does it and the 3550 handle doing nbar classifying? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan > Sent: Wednesday, 4 April 2007 00:29 > Cc: [email protected] > Subject: Re: [c-nsp] 2960 for video & qos > > So matching and IP and setting the DSCP = AF41, then these switches > should work just fine for Video QOS? I don't need any layer 3 > capabilities because these switches will be within a subnet. > > Dan. > > [EMAIL PROTECTED] wrote: > > hello, > > > > yes, you can use ip access list on 2960 even if it's only a L2 device: > > > > Example: (mark <IP> with DSCP = EF) > > > > ip access-list standard acl-test > > permit <IP> > > > > class-map cm-test > > match access-group name acl-test > > > > policy-map pm-test > > class cm-test > > set dscp EF > > > > (service-policy input pm-test on interface) > > > > -- > > liviu. > > On Tuesday 03 April 2007 15:04, Sean Watkins wrote: > > > >> In the 2960 configuration library; it says you can use IP access lists > >> in class-map commands for police/qos etc. Do you know if this is true? > >> > >> Search for "Classifying Traffic by Using ACLs " > >> > >> > >> http://www.cisco.com/en/US/products/ps6406/products_configuration_guide_ > >> chapter09186a00805a7699.html > >> > >> > >> Sean > >> > >> > >> -- > >> Sean Watkins > >> North Rock Communications > >> Phone: 441-540-4102 > >> > >> > >>> -----Original Message----- > >>> From: [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] On Behalf Of Liviu Pislaru > >>> Sent: Tuesday, April 03, 2007 12:23 AM > >>> To: [email protected] > >>> Subject: Re: [c-nsp] 2960 for video & qos > >>> > >>> hello, > >>> > >>> 2960 works just fine for LAN QoS. you can mark, classifiy and > >>> police, you can adjust maping, buffers and output queues > >>> (1p3q3t). if you have voip on your network you can also use > >>> "auto-qos"; use 3560 only if you need la L3 device. > >>> > >>> -- > >>> liviu. > >>> > >>> ----- Original Message ----- > >>> From: "Dan" <[EMAIL PROTECTED]> > >>> Cc: <[email protected]> > >>> Sent: Tuesday, April 03, 2007 1:06 AM > >>> Subject: [c-nsp] 2960 for video & qos > >>> > >>> > >>>> Hello, > >>>> > >>>> We are setting up a 6 site video conferencing system and we need to > >>>> replace some of our switches and I was wondering if a 2960 > >>>> > >>> would do the > >>> > >>> > >>>> job as far as QOS goes? Or should I go with a 3560? > >>>> > >>>> Dan. > >>>> > >>>> _______________________________________________ > >>>> cisco-nsp mailing list [email protected] > >>>> https://puck.nether.net/mailman/listinfo/cisco-nsp > >>>> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >>>> > >>> _______________________________________________ > >>> cisco-nsp mailing list [email protected] > >>> https://puck.nether.net/mailman/listinfo/cisco-nsp > >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ > >>> > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
