What about VACL? What is it for? What does VACL look like? Thanks
> hi, > > think of a router as a circle with you inside (center of that circle) :). > inbound traffic is the traffic that come towards YOU through interface/SVI > you > want to configure ACL (SVI 100) an leaves the router through another > interface. > > outbound traffic is the destined traffic for vlan 100 that leaves the > router > through interface/SVI you want to configure ACL (SVI 100). > > as Dale said, when you apply ACL, try forget interface "Vlan100" is > virtual. > > -- > liviu. > > On Wednesday 11 April 2007 02:59, Kyle Evans wrote: >> Hello, >> >> I'm wondering what the convention is for an access list on a vlan >> interface. How do I tell what is inbound and what is outbound? For >> example, if I have vlan 100 and a vlan interface 100 with ip address >> 192.168.1.1 that serves as a gateway for 192.168.1.0/24, is traffic from >> 192.168.1.0/24 to 192.168.1.1 inbound? Or is traffic from the rest of >> the world back to 192.168.1.1 inbound? >> >> >> Kyle >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
