Thanks, The debug commands helped me out. It was an authentication problem. I had to change this:
ppp chap hostname nothere ppp chap password 7 nothere to this: ppp authentication chap callin Dan. Ian McDonald wrote: > Dan wrote: >> Hello, >> >> I'm having some trouble with connecting an 827 router to my isp. I >> have tried calling them but they don't seem to want to help. >> >> When i'm connected via the console the virtual-access1 interface just >> goes up and down and never connects. >> >> Building configuration... >> >> Current configuration : 2458 bytes >> ! >> version 12.2 >> no service pad >> service timestamps debug datetime msec >> service timestamps log datetime msec >> >> ip subnet-zero >> ip name-server 142.161.130.155 >> ip name-server 142.161.2.155 >> ! >> ip inspect name myfw cuseeme timeout 3600 >> ip inspect name myfw ftp timeout 3600 >> ip inspect name myfw http timeout 3600 >> ip inspect name myfw rcmd timeout 3600 >> ip inspect name myfw realaudio timeout 3600 >> ip inspect name myfw smtp timeout 3600 >> ip inspect name myfw tftp timeout 30 >> ip inspect name myfw udp timeout 15 >> ip inspect name myfw tcp timeout 3600 >> ip inspect name myfw h323 timeout 3600 >> vpdn enable >> ! >> vpdn-group 1 >> request-dialin >> protocol pppoe >> ! >> ! >> ! >> ! >> ! >> ! >> ! >> interface Ethernet0 >> ip address 10.10.50.103 255.255.255.0 >> ip nat inside >> ip tcp adjust-mss 1452 >> hold-queue 100 out >> ! >> interface ATM0 >> no ip address >> no atm ilmi-keepalive >> bundle-enable >> dsl operating-mode auto >> hold-queue 224 in >> ! >> interface ATM0.1 point-to-point >> pvc 0/35 >> pppoe-client dial-pool-number 1 >> ! >> ! >> interface Dialer1 >> ip address negotiated >> ip mtu 1492 >> ip nat outside >> encapsulation ppp >> ip tcp adjust-mss 1452 >> dialer pool 1 >> dialer-group 1 >> ppp authentication pap chap callin >> ppp chap hostname *************** >> ppp chap password 0 ********** >> ppp pap sent-username *********** password 0 ********** >> ! >> ip nat inside source list 102 interface Dialer1 overload >> ip classless >> ip route 0.0.0.0 0.0.0.0 Dialer1 >> ip http server >> no ip http secure-server >> ! >> ! >> access-list 102 permit ip 10.10.50.0 0.0.0.255 any >> access-list 111 permit icmp any any administratively-prohibited >> access-list 111 permit icmp any any echo >> access-list 111 permit icmp any any echo-reply >> access-list 111 permit icmp any any packet-too-big >> access-list 111 permit icmp any any time-exceeded >> access-list 111 permit icmp any any traceroute >> access-list 111 permit icmp any any unreachable >> access-list 111 permit udp any eq domain any >> access-list 111 permit udp any eq bootps any eq bootpc >> access-list 111 permit udp any eq bootps any eq bootps >> access-list 111 permit esp any any >> access-list 111 permit udp any any eq isakmp >> access-list 111 deny ip any any >> dialer-list 1 protocol ip permit >> ! >> ! >> line con 0 >> stopbits 1 >> line vty 0 4 >> exec-timeout 0 0 >> login local >> length 0 >> ! >> scheduler max-task-time 5000 >> end >> >> dsl03# >> >> >> From what I can tell its basically a default config. >> >> Thanks, >> Dan. >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > Oh I forgot > > debug atm events > debug ppp authentication > > etc > etc > > > Here's a config from one of my working ones, here in the UK. It > appears auto works fine on this one. On 857 and 837, work it doesn't. > > ! > version 12.2 > no service pad > service timestamps debug uptime > service timestamps log uptime > service password-encryption > ! > hostname Router > ! > enable password 7 nothere > ! > ip subnet-zero > ip name-server 158.152.1.58 > ip name-server 158.152.1.43 > ip dhcp excluded-address 10.10.10.1 > ! > ip dhcp pool CLIENT > import all > network 10.10.10.0 255.255.255.0 > default-router 10.10.10.1 > dns-server 158.152.1.58 158.152.1.43 > lease 0 2 > ! > ! > ! > ! > interface Ethernet0 > ip address 10.10.10.1 255.255.255.0 > ip nat inside > ip tcp adjust-mss 1452 > hold-queue 100 out > ! > interface ATM0 > no ip address > atm vc-per-vp 64 > no atm ilmi-keepalive > pvc 0/38 > encapsulation aal5mux ppp dialer > pppoe-client dial-pool-number 1 > ! > dsl operating-mode auto > ! > interface Dialer1 > ip address nothere 255.0.0.0 > ip mtu 1492 > ip nat outside > encapsulation ppp > ip tcp adjust-mss 1452 > dialer pool 1 > dialer-group 1 > ppp authentication chap pap callin > ppp chap hostname nothere > ppp chap password 7 nothere > ppp pap sent-username nothere password 7 nothere > ppp ipcp dns request > ppp ipcp wins request > hold-queue 224 in > ! > ip nat inside source list 102 interface Dialer1 overload > ip nat inside source static tcp 10.10.10.10 5900 interface Dialer1 5900 > ip classless > ip route 0.0.0.0 0.0.0.0 Dialer1 > ip http server > ! > ! > access-list 23 permit 10.10.10.0 0.0.0.255 > access-list 23 permit nothere 0.0.0.255 > access-list 23 permit nothere 0.0.0.255 > access-list 102 permit ip 10.10.10.0 0.0.0.255 any > access-list 102 permit tcp any any eq 5900 > dialer-list 1 protocol ip permit > ! > line con 0 > exec-timeout 120 0 > stopbits 1 > line vty 0 4 > access-class 23 in > exec-timeout 120 0 > password 7 nothere > login > length 0 > ! > scheduler max-task-time 5000 > end > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
