Hello, I'm having some trouble with connecting an 827 router to my isp. I have tried calling them but they don't seem to want to help.
When i'm connected via the console the virtual-access1 interface just goes up and down and never connects. Building configuration... Current configuration : 2458 bytes ! version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec ip subnet-zero ip name-server 142.161.130.155 ip name-server 142.161.2.155 ! ip inspect name myfw cuseeme timeout 3600 ip inspect name myfw ftp timeout 3600 ip inspect name myfw http timeout 3600 ip inspect name myfw rcmd timeout 3600 ip inspect name myfw realaudio timeout 3600 ip inspect name myfw smtp timeout 3600 ip inspect name myfw tftp timeout 30 ip inspect name myfw udp timeout 15 ip inspect name myfw tcp timeout 3600 ip inspect name myfw h323 timeout 3600 vpdn enable ! vpdn-group 1 request-dialin protocol pppoe ! ! ! ! ! ! ! interface Ethernet0 ip address 10.10.50.103 255.255.255.0 ip nat inside ip tcp adjust-mss 1452 hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive bundle-enable dsl operating-mode auto hold-queue 224 in ! interface ATM0.1 point-to-point pvc 0/35 pppoe-client dial-pool-number 1 ! ! interface Dialer1 ip address negotiated ip mtu 1492 ip nat outside encapsulation ppp ip tcp adjust-mss 1452 dialer pool 1 dialer-group 1 ppp authentication pap chap callin ppp chap hostname *************** ppp chap password 0 ********** ppp pap sent-username *********** password 0 ********** ! ip nat inside source list 102 interface Dialer1 overload ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip http server no ip http secure-server ! ! access-list 102 permit ip 10.10.50.0 0.0.0.255 any access-list 111 permit icmp any any administratively-prohibited access-list 111 permit icmp any any echo access-list 111 permit icmp any any echo-reply access-list 111 permit icmp any any packet-too-big access-list 111 permit icmp any any time-exceeded access-list 111 permit icmp any any traceroute access-list 111 permit icmp any any unreachable access-list 111 permit udp any eq domain any access-list 111 permit udp any eq bootps any eq bootpc access-list 111 permit udp any eq bootps any eq bootps access-list 111 permit esp any any access-list 111 permit udp any any eq isakmp access-list 111 deny ip any any dialer-list 1 protocol ip permit ! ! line con 0 stopbits 1 line vty 0 4 exec-timeout 0 0 login local length 0 ! scheduler max-task-time 5000 end dsl03# From what I can tell its basically a default config. Thanks, Dan. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
