Hello: > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of J Springer > Sent: Thursday, April 12, 2007 8:18 AM > To: [EMAIL PROTECTED] > Subject: [c-nsp] 802.1q - Max Number of Subinterfaces > > I am interested in recommendations on a Cisco unit that will terminate > a minimum > of 2000 (preferably 4096) VLANs. > > The ethernet (Gig or Fast) will be set to trunk. > > I've tested SVI on a couple of switches and 802.1Q subints on routers > but am > finding conflicting documentation regarding the maximum number of VLANs > that > various pieces of equipment support. > > Will a 7206VXR suffice for this purpose? Is there unit better suited > and > possibly less cost? >
Something to be aware of is the per-interface sub-interface limits for the various cards. Perhaps someone has a pointer to an official Cisco document, but I *think* almost all of the FE/GE interfaces on the 7200-series support up to 256 sub-interfaces. Thus, you'd have to have multiple interfaces to hit the chassis limit. Regards, Mike _______________________________________________ cisco-nsp mailing list [EMAIL PROTECTED] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
