On our 7600 I could run this manual command: SUP720#redundancy force-switchover
I'm not sure about a permanent startup configuration. -Rich >Message: 1 >Date: Thu, 26 Apr 2007 14:26:26 +0800 >From: "Affandi Indraji" <[EMAIL PROTECTED]> >Subject: [c-nsp] Catalyst 6500 Active and Standby Supervisor Engine >To: [email protected] >Message-ID: > <[EMAIL PROTECTED]> >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >Hi, > >Is there any way that i can force to set slot 5 as the primary supervisor >engine? the reason i ask this is because i have non-deterministic behaviour >when i boot up the switch. Sometimes slot 6 become the primary, some other >time, slot 5 become the primary. > >Btw, I use Sup 720-3BXL with IOS 12-2.18. Thank you. > >Regards, >Affandi > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
