* Ahmad Cheikh-Moussa <[EMAIL PROTECTED]> wrote: > >> When I add vpnclient management clear to my vpnclient config, then everything >> works. Is this a new feature ?
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html#wp1001074 >One another question. The output of the show crypto isakmp sa has changed. >With 6.x, if a tunnel is established, the state were QM_Idle. >Now with 7.x it is AM_Active. On an IOS Router it is still QM_Idle. AM denotes Aggressive Mode exchange, QM means Quick Mode. Depending on what the initiator proposes and what the resonder is willing to accept, AM may be used for establishing IKE SA. This may be the case when you want to establish Lan-2-Lan tunnels with preshared keys when the remote end has dynamic IP addresses. IOS spokes dont establish AM by default, iirc. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
