On 4/30/07, Dan <[EMAIL PROTECTED]> wrote: > interface FastEthernet0/3/3 > switchport access vlan 303 [...] > route-map nat-wb permit 10 > match interface FastEthernet0/3/3 [...] > interface Vlan303 > ip address 64.x.x.1 255.255.255.240 [...] > ip nat inside source route-map nat-wb interface FastEthernet0/3/3 overload
Fa0/3/3 is a switchport, you want to overload onto the SVI (vlan303). route-map nat-wb should also match the SVI, not the switchport. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
