Hi Nikolay, it reports you that the cache in which NetFlow data are stored is full. Depending on the architecture and the available options you can:
* enable flow aggregation * raise the number of cache entries * play with the flow/cache timeouts Hope this helps. Cheers, Paolo On Tue, May 01, 2007 at 11:07:42AM +0300, Nikolay Pavlov wrote: > Hello folks. Did some one know how to prevent this: > > %C4K_HWNETFLOWMAN-4-FLOWSLOSTERR: Netflow stats lost either due to > %hardware hash collisions or full hardware flow table. Stats lost for > %150958 packets. > > This is Cisco 4507 with WS-F4531 Netflow Services Card > > -- > ====================================================================== > - Best regards, Nikolay Pavlov. <<<----------------------------------- > ====================================================================== > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
