This generally indicates that you have a Sup720-base that was upgraded to Sup720-3bxl. The hardware just does not support "show cat".
IIRC from the Sup720, only the packages that came from the factory as Sup720-3BXL have this counter. --Phil On May 1, 2007, at 9:23 AM, John R wrote: > Hi > > We have a few 6503-E with SUP720-3BXL. > > They are all running 12.2(18)SXF4 ADVIPSERVICES > > One of them seems unwilling to show anything for traffic meter. > > SOV#show cat t > This Supervisor hardware revision has no support for traffic meter > feature. > > > SOV#show mod 1 > Mod Ports Card Type Model > Serial > No. > --- ----- -------------------------------------- ------------------ > ----------- > 1 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL > SAD10030A8K > > Mod MAC addresses Hw Fw Sw > Status > --- ---------------------------------- ------ ------------ > ------------ > ------- > 1 000d.2910.3f24 to 000d.2910.3f27 3.2 8.1(3) 12.2(18) > SXF4 Ok > > Mod Sub-Module Model Serial Hw > Status > ---- --------------------------- ------------------ ----------- > ------- > ------- > 1 Policy Feature Card 3 WS-F6K-PFC3BXL SAD1013C01W > 1.3 Ok > 1 MSFC3 Daughterboard WS-SUP720 SAD1014DLJH > 2.1 Ok > > Mod Online Diag Status > ---- ------------------- > 1 Pass > > As far as im concerned anything with a PFC3B/BXL should support > traffic > meters... Or did I miss something somewhere :) > > Thanks! > > john > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
