On a 6500 platform with 12.2(18)SXF6 and Sup720-3BXL I have encountered the
following problem:
When a VACL with action: forward capture and PBR are both applied to an
interface they are merged.
Nothing is stored in bank 0.
The VACL is:
Vlan access-map "CAPTURE-VACL" 10
match: ip address CAPTURE
action: forward capture
Vlan access-map "CAPTURE-VACL" 20
match: ip address ALL
action: forward
When the following VACL is applied no merge occurs:
Vlan access-map "RSPAN-VACL" 10
match: ip address RSPAN
action: forward
When action redirect is applied no merge occurs:
Vlan access-map "CAPTURE-VACL" 10
match: ip address CAPTURE
action: redirect GigabitEthernet10/48
Vlan access-map "CAPTURE-VACL" 20
match: ip address ALL
action: forward
Is this a bug or feature?
It looks like policy routing and VACL capture both rely
on some underlying mechanism that only exists in TCAM bank 1.
Is this the case?
LR Mack McBride
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
