Colleagues, I have a usual situation where I have to do a traffic shaping for our customers. My switch is 3550 SMI IOS Version 12.1(13)EA1. I used a typical config to do so but unfortunately neither this or other config have not work up to now. So any body could help me in it? First configuration was something like this: mls qos ! class-map match-all customer1-Recv match access-group name customer1-RL-Recv class-map match-all customer2-Recv match access-group name customer2-RL-Recv class-map match-all Any match access-group 1 class-map match-all customer2-Send match access-group name customer2-RL-Send class-map match-all customer1-Send match access-group name customer1-RL-Send ! ! policy-map Receive class customer2-Recv police 2000000 8000 exceed-action drop class customer1-Recv police 128000 8000 exceed-action drop policy-map From-customer2 class Any police 20000000 8000 exceed-action drop class customer2-Send police 20000000 8000 exceed-action drop policy-map From-customer1 class Any police 1024000 8000 exceed-action drop class customer1-Send police 1024000 8000 exceed-action drop ! ! interface FastEthernet0/9 description << customer1 >> switchport access vlan 907 switchport mode access bandwidth 1000000 no ip address load-interval 30 service-policy input From-customer1 ! interface FastEthernet0/24 description << Trunk To Fa0/24 2950 >> switchport trunk encapsulation dot1q switchport mode trunk bandwidth 2000000 no ip address load-interval 30 service-policy input From-customer2 ! ! interface GigabitEthernet0/1 description << Trunk To Gi1/2 BigSwitch >> switchport trunk encapsulation isl switchport mode trunk no ip address ip access-group 110 in load-interval 30 service-policy input Receive ! ip access-list extended customer2-RL-Recv permit ip any ll.mm.nn.oo 0.0.0.16 ip access-list extended customer2-RL-Send permit ip ll.mm.nn.oo 0.0.0.16 any ip access-list extended customer1-RL-Recv permit ip any host xx.yy.zz.tt ip access-list extended customer1-RL-Send permit ip host xx.yy.zz.tt any ! ! It doesn't work at all. I change the burst but it won't help then try to use aggregate method and again nothing. Then I try to use DSCP value still nothing changed. Seams this SMI switch do what ever except what you need. Regards, Taher
--------------------------------- TV dinner still cooling? Check out "Tonight's Picks" on Yahoo! TV. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
