Running 12.2.18SXF8 on sup720-3b/6506 Router(config)#int gi1/1 Router(config-if)#no switchport Router(config-if)#int gi1/1.1 Router(config-subif)#encapsulation isl 1 Command rejected: VLAN 1 cannot be allocated because it is a default VLAN Router(config-subif)#encapsulation dot1Q 1 native Command rejected: VLAN 1 cannot be allocated because it is a default VLAN
However this was working like a charm on older IOS versions, or onto other platforms, so is it a platform limitation ? Is it due to 12.2.18SXF8 ? Should I consider a change towards SXD train ? I am heritating of this design and need to route all my .1 subinterfaces, without renumbering them if possible. cheerios _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
