On Wed, May 16, 2007 5:12 pm, Rick Kunkel wrote: > We've got a Sup2 with the two GigE ports and 48 port 6248 module. I've > assigned an IP address to one of the GigE ports, and plugged 3 AS5200's > into the 6248, and assigned those ports to VLAN 12. > > The GigE port has (example) a 1.1.1.1 address. The AS5200's have > 2.2.2.10 through 2.2.2.13. > > Here's the bonehead part. Would the standard way to deal with routing > between these be to make a VLAN Interface on the 6509? I made a VLAN 12 > interface and gave it the IP address 2.2.2.1. Works great.
Sounds spot on to me. Treat the 6500/7600 like a router with all the WAN cards in it, connected by an invisible internal .1Q trunk to a switch with all the LAN cards in it, all of which just happens to be in the same physical chassis, and you won't go too far wrong. Regards, Tim. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
