Bridging was also suggested, but I dont think this would be suitable since we are talking about a couple of 100 Megs of traffic with lots of multicast :)
Does anybody know what kind of performance gain provided by using l2 local switching over bridging? I can't find much documentation on this, I'm assuming that because l2 local switching was developed with CEF in mind it should have bad things about it, but I could be wrong... Dave. David Freedman wrote: > Anybody know when this will be available? > > Currently does not work in 12.2(28)SB6 on 72xx > > ! > int g0/3.28100 > encaps dot1q 28 second-dot1q 100 > ! > int g0/3.28150 > encaps dot1q 28 second-dot1q 150 > ! > > (config)#connect foo Gi0/3.28100 Gi0/3.28150 > QinQ not supported on GigabitEthernet0/3.28100 > %CONN: invalid segment 1 > %CONN: Invalid Command > > Many thanks > > David Freedman > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
