On Tuesday 22 May 2007, Jay Hennigan wrote: > RJ48S is indeed the correct designation for T1, but it uses pairs 1-2 > and 4-5. 568B pairing would be white-orange and white-blue. 1-2 and > 7-8 are the correct pairs for 56K DDS circuits.
Ok, we're both wrong. :-) RJ48S is the DDS 56K standard, and is wired the way I mentioned. I did some radio station digital STL's over 56KDDS circuits in my former position as a broadcast engineer, and misremembered. The T1 standard is RJ48C, and is wired the way you mentioned. Argh. Long day fighting the firewall.... -- Lamar Owen Chief Information Officer Pisgah Astronomical Research Institute 1 PARI Drive Rosman, NC 28772 (828)862-5554 www.pari.edu _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
