On 6/1/07, Asbjorn Hojmark - Lists <[EMAIL PROTECTED]> wrote: > > > Is this something that has changed recently or has sup-32 > > always supported the sup-400. > > Not "always". Sup32 has supported SIP-400 since SXF. > > -A > > Well in any case the product sheet is confusing....
Does somebody care to enlighten me about the switching fabric on the SIP-400, when do I want to have to connected to the fabric. I assume that the highest density setup would be 4 times 2-port 1GbE SPA modules, a total of 8Gbps. But according to the specs the SIP-400 only does 4Gbps @64-byte packets. http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet0900aecd8027c9e6.html Regards MKS _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
