To start with you have to upgrade to 256MB of RAM on both the SP and RP to support 12.2(18)SXF on the Sup2. http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.ht m#wp2561255
David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bryan > Sent: Thursday, June 07, 2007 9:43 PM > To: [email protected] > Subject: [c-nsp] 6506 SUP2/MSFC2 Native IOS upgrade issue > > - Greetings all, trying to upgrade the IOS on a SUP2/MSFC2 > which is already in native move at 12.1(27b)E and trying to > upgrade to 12.2.18 but I keep seeing similar errors to this: > > - I uploaded the image to disk0: and set the following: > > boot system flash disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin > > - Upon reboot it won't boot from the disk, it shows: > > System Bootstrap, Version 7.1(1) > Copyright (c) 1994-2001 by cisco Systems, Inc. > c6k_sup2 processor with 131072 Kbytes of main memory > > Autoboot: failed, BOOT string is empty > rommon 1 > boot disk0: > string is disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin > > - so I get into rommon and i force it to boot from disk0: and > it appears to load up just fine but then it just crashes and I see: > > > %Software-forced reload > > > Breakpoint exception, CPU signal 23, PC = 0x41CC9D0C > > > -Traceback= 41CC9D0C 41CC7C58 41A97440 41A9746C 4197D57C 419B9E64 > 419B0214 419B026C 407482CC 40748FB4 418D975C 418D9578 > 41A38A00 41A35920 > 41A35B3C 41CBC26C > $0 : 00000000, AT : 1E020000, v0 : 43D10000, v1 : 00000090 > a0 : 505714C8, a1 : 5000BAF4, a2 : 00000005, a3 : FFFFFFFC > t0 : 00000008, t1 : 00000001, t2 : 00000063, t3 : 00000003 > t4 : 5000BAA0, t5 : 00000000, t6 : 00001F6F, t7 : 5000BA98 > s0 : 00000000, s1 : 42F00000, s2 : 447E814C, s3 : 087C9248 > s4 : 45275A30, s5 : 451F4C18, s6 : 00000040, s7 : 436F0000 > t8 : 5000BA74, t9 : 00000007, k0 : 00000000, k1 : 00000000 > gp : 42F516E0, sp : 5000BB28, s8 : 00000000, ra : 41CC7C58 > EPC : 41CC9D0C, ErrorEPC : 4036B058, SREG : 3401F103 > MDLO : 99999A3B, MDHI : 00000285, BadVaddr : 578495DA > CacheErr : F4800000, DErrAddr0 : 1E02000C, DErrAddr1 : 805714C8 > DATA_START : 0x42C4B040 > Cause 00000824 (Code 0x9): Breakpoint exception > > Writing crashinfo to bootflash:crashinfo_20070608-021407 > > === Flushing messages (02:14:07 UTC Fri Jun 8 2007) === > > Buffered messages: > Queued messages: > 00:00:56: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console > debugging output. > > 00:00:54: RP: Currently running ROMMON from S (Gold) region > 00:00:56: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has > failed due > to exception , reset by [1/1] > *** System received a Software forced crash *** > signal= 0x17, code= 0x436a0000, context= 0x43d15fa4 > PC = 0x41cbc874, Cause = 0x3820, Status Reg = 0x34018002 > rommon 1 > > 00:00:57: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console > debugging output. > > 00:00:57: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to > ensure console debugging output. > > 00:00:57: %OIR-SP-6-CONSOLE: Changing console ownership to > switch processor > > > > *** System received a Software forced crash *** > signal= 0x17, code= 0x41e00000, context= 0x41e2c044 > PC = 0x402d11ec, Cause = 0x1820, Status Reg = 0x34018002 > > > Any thoughts/ideas/suggestions? > > > TIA, > > Bryan > > -- > _________________________________________________ > _________________________________________________ > Bryan Welch Direct:(425)947-7002 > Tec-Works Inc Fax: (425)821-0596 > Total Network Solutions [EMAIL PROTECTED] > www.tec-works.com > _________________________________________________ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
