It can be found online. Your Telco would terminate it as a BNC connector on both a-end and b-end.
Zahid Hassan wrote on Mon, Jun 11, 2007 at 08:45:07PM SGT : | Dear All, | | | Can anyone suggest the right DS-3 module and cable for Cisco 7200 and 2800 series routers. | | As per Cisco documentation, a PA-E3 can be used for 7200 and a NM-1T3/E3 for 2800 series. | | Please can anyone comment of this, also would appreciate any suggestion on the cables to be used to connect to these cards and to the supplier's termination equipment. | | | | Thanks in advance. | | | | Zahid | | -- | Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! | Ideal f?r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer | _______________________________________________ | cisco-nsp mailing list [email protected] | https://puck.nether.net/mailman/listinfo/cisco-nsp | archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Regards, Raymond Ho ---------- PGP Key ID 478C4F42 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
