the C3750 is capable of wire rate forwarding so there should be no TCP performance issue with vanilla forwarding. if you are having issues when rate limiting is enabled it could be due to any number of reasons (e.g. it is behaving as per configuration :) )
some more detail might help someone on the list answer your question. such as topology, configuration, traffic pattern, etc. cheers .siva On Tue, 12 Jun 2007, Paul Schopis wrote: > I am needing to find a concise description of an issue on the Cisco 3550 or > 3750. As I understand it there is an issue with getting good TCP performance > due to a hardware limitation (Broadcom Chipset?) that will not allow one to > properly set the burst size. I would like to understand this issue better and > seem to be having difficulty finding a good description of the issue. > > Thanks in advance, > Paul > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
